List of Participants

Firstname Lastname Country Company
Patrick Abbott USA National Insitute of Standards and Technology
Stanislaw Adamczak Poland Kielce University of Technology
Dusan Agrez Slovenia University of Ljubljana
Mirian Agus Italy Faculty of Humanistic Studies, University of Cagliari
Petya Aladzhem Bulgaria Union of Metrologists in Bulgaria
Jussi Ala-Hiiro Finland VTT Technical Research Centre of Finland Ltd
Tamara Aleksandrov Fabijanic Croatia Faculty of Mechanical Engineering and Naval Architecture
Aykurt Altintas Denmark Force Technology
Jaouad Amaichan France  
Pasquale Arpaia Italy  
Fredrik Arrhén Sweden  
Andrey Aslanyan Russia FSUE 'VNIIFTRI'
Edward Aslanyan Russia VNIIFTRI
Sefer Avdiaj Albania University of Prishtina
Philippe Averlant France LNE
Bulent Aydemir Turkey TUBITAK UME
Luis Bacelar Portugal TAP Portugal
Jiří Balík Czech Republic  
Stuart Ballard United Kingdom Norbar Torque Tools Ltd
Sioma Baltianski Israel Technion – Israel Institute of Technology
Pavel Baranov Russia Tomsk Polytechnic University
Claire Bartoli France LNE
Emil Bashkansky Israel  
Henri Baumann Switzerland Federal Institute of Metrology METAS
Sebastian Baumgarten Germany Physikalische-Technische Bundesanstalt
Eric Benoit France University Savoie Mont Blanc
Ondřej Berka Czech Republic Czech Technical University
Rossella Berni Italy University of Florence
James Berry United Kingdom National Physical Laboratory
Piotr Bilski Poland Institute of Radioelectronics
Faizulsalihin Bin Abas Japan Ritsumeikan University (BKC)
Gregor Bobovnik Slovenia University of Ljubljana, Faculty of Mechanical Engineering
Rita Boeing USA The Modal Shop, Inc.
Ryszard Bogacz Poland Institute of Measurement Science, Electronics and Control
Gerardo Ruiz Botello Mexico Universidad Nacional Autonoma de Mexico
Thomas Bretterklieber Austria Graz University of Technology
Philip Briggs Australia Proficiency Testing Australia
Thiago Brito Pereira de Souza Brazil Centro de Tecnologia da Eletronorte
Peter Brueckner Germany TU Ilmenau
Andreas Brüge Germany Physikalisch-Technische Bundesanstalt
Thomas Bruns Germany Physikalisch-Technische Bundesanstalt (PTB)
Andrea Buratti Germany Laboratory for Tool Machines and Production Engineering (WZL)
Piotr Burnos Poland AGH University of Science and Technology
Oleg Bushuev Russia South Ural State University
Chenguang Cai China National Institute of Metrology
Domenico Caiazza Italy CERN - European Organization for Nuclear Research
Denise Das Merces Camarano Brazil Comissão Nacional de Energia Nuclear
Alessio Carullo Italy Politecnico di Torino
Frederica Carvalho Portugal TAP Portugal
Isabel Castanheira Portugal Instituto Nacional de Saúde Doutor Ricardo Jorge
Malone Castro Brazil  
Marcantonio Catelani Italy DINFO - University of Florence
Luca Celenza Italy University of Cassino and Southern Lazio
Lorenzo Ciani Italy University of Florence
Karen Clarke Ireland  
Roland Collay France  
Mariella Corvino Italy University of Cassino and Southern Lazio
Elisabeth Costa Monteiro Brazil Pontifical Catholic University of Rio de Janeiro
Francesco Crenna Italy University of Genova
Felix Crößmann Germany Hottinger Baldwin Messtechnik GmbH
Shan Cui Singapore National Metrology Centre
Marija Cundeva-Blajer Macedonia Ss. Cyril and Methodius University in Skopje
Zbigniew Czaja Poland Gdansk University of Technology
Jakub Čedík Czech Republic Czech University of Life Sciences
Maria Laura D' Angelo Italy Italian Institute of Technology
Pasquale Daponte Italy University of Sannio
Mauro D'Arco Italy Università di Napoli Fedrico II
Egidio De Benedetto Italy Università del Salento
José Luis De La O Martinez Mexico Ciatec, A.C.
Luca De Vito Italy University of Sannio
Jan Deconinck Belgium FPS Economy
Joaquin Del Rio Fernandez Spain Universitat Politècnica de Catalunya
Severine Demeyer France Laboratoire National de Metrologie et d'Essais
Giampaolo E. D'Errico Italy INRIM
Valeriy Didenko Russia National Research University MPEI
Peschel Diedert Germany DrehmomentService Dr. Peschel e.K.
Flavio D'Innocenzo Italy Università degli Studi dell'Aquila
Paul-Gerald Dittrich Germany Technologie- und Innovationspark Jena GmbH
Justina Dobilienė Lithuania Institute of Metrology
Santo Dolce Italy Università degli Studi dell'Aquila
Gustavo Donatelli Brazil CERTI
Miroslav Dovica Slovak Republic Mechanical Engineering Faculty, Technical University of Kosice
Ágota Drégelyi-Kiss Hungary Óbuda University
Ana Maria Duarte Portugal RELACRE
Numan M. Durakbasa Austria Vienna University of Technology
Yasin Durgut Turkey UME National Metrology Institute
Ivana Durickovic France Cerema
Sascha Eichstädt Germany Physikalisch-Technische Bundesanstalt
Katsuyoshi Endo Japan Osaka University
Judit Farago Hungary IMEKO International Measurement Confederation
Zsolt Farkas Hungary Magnetec-Ungarn
Thomas Fehling Germany Sartorius AG
Meng Feng China National institute of metrology
Ravi Fernandes Germany Physikalisch Technische Bundesanstalt
C. Ferrero Italy  
André Fiebach Germany Physikalisch-Technische Bundesanstalt
William Fisher USA University of California, Berkeley
Joachim Fischer Germany Physikalisch-Technische Bundesanstalt
Elena Fitkov-Norris United Kingdom Kingston University
Cristina Flores Portugal National Health Institute
Alistair Forbes United Kingdom National Physical laboratory
Hans Joerg Fraiss Germany Hottinger Baldwin Messtechnik GmbH
Larsonnier Franck France CEA
Klaus Fritsch Switzerland Mettler-Toledo AG
Thomas Froehlich Germany Technische Universität Ilmenau
Ivan Frollo Slovak Republic Institute of Measurement Science SAS
Mauricio Frota Brazil Pontifícia Universidade Católica de Rio de Janeiro
Andreia Furtado Portugal Instituto Português da Qualidade, I.P.
Hideo Furuhashi Japan Aichi Institute of Technology
Ryoshu Furutani Japan Tokyo Denki University
Andrey Gadyuchko Germany Kendrion Mechatronics Center GmbH
Darius Gailius Lithuania Institute of Metrology
Michael Gaitan USA National Institute of Standards and Technology
Bogdan Galovskyi Germany Institute of Manufacturing Metrology
Okhan Ganioglu Turkey Tubitak-ume National Metrology Institude
Adam Gaska Poland Cracow University of Technology
Piotr Gąska Poland Laboratory of Coordinate Metrology
Rosanna Gatti Italy ENEA
Alessandro Germak Italy  
Domenico Giordano Italy  
Darina Glittová Slovak Republic Technical university of Kosice
Rainer Göb Germany  
Bas Gokcen Turkey  
Valerii Granovskii Russia Central Scientific Research Institute Elektropribor
Kenneth Grattan United Kingdom City University London
Andreas Gröschl Germany Friedrich-Alexander-Universität Erlangen-Nürnberg
Hermann Groß Germany Physikalisch-Techn. Bundesanstalt
Maciej Gruza Poland Laboratory of Coordinate Metrology
Tomasz Grysinski Poland Wrocław University of Technology
Asli Gunay Bulutsuz Turkey  
Vladimír Haasz Czech Republic Czech Technical University in Prague
Frank Haertig Germany Physikalisch-Technische Bundesanstalt (PTB)
Hafid Hafid Indonesia Research Centre for Metrology – Indonesian Institute of Sciences
Katrin Häfner Germany Häfner Gewichte GmbH
Martin Häfner Germany Häfner Gewichte GmbH
Li Haigen China Shaoxing Kent Mechanical & Electrical Co.,Ltd
Csaba Hajdu Switzerland European Organisation for Nuclear Research (CERN)
Chingiz Hajiyev Turkey Istanbul Technical University
Carlos Hall Brazil Pontifical Catholic University of Rio de Janeiro
Jouko Halttunen Finland Tampere University of Technology
Robert Hanus Poland Rzeszow University of Technology, Faculty of Electrical and Computer Engineering
Wiktor Harmatys Poland Cracow Uniwersity of Technology
Jay Hendricks USA NIST
Falko Hilbrunner Germany Sartorius AG
Denis F. Hinz Denmark Kamstrup A/S
Yukio Hiranaka Japan  
Miha Hiti Slovenia Slovenian National Building and Civil Engineering Institute
Dietrich Hofmann Germany Technologie- und Innovationspark Jena GmbH
Jankees Hogendoorn Netherlands KROHNE
Paul Hohmann Germany CEH Calibration Engineering Hohmann e.K.
Jan Holub Czech Republic Institute of Chemical Technology in Prague
Satoshi Honda Japan Keio university
Man Hong Hu China national institute of metrology
William Huang Germany GTM Testing and Metrology GmbH
Zbigniew Humienny Poland Institute of Machine Design Fundamentals
Dariusz Chaberski Poland Nicolaus Copernicus University
Le Chen China China Jiliang University
Akobuije Chijioke USA National Institute of Standards and Technology
Yury Chuguy Russia Technological Design Institute of Scientific Instrument Engineering SB RAS
Anna Chunovkina Russia D.I. Mendeleyev Institute for Metrology
Petr Chvojka Czech Republic Czech Technical University
Hideaki Iizumi Japan National Metrology Institute of Japan (NMIJ), AIST
Damir Ilić Croatia  
Hidetaka Imai Japan AIST
Masatoshi Ishikawa Japan The University of Tokyo
Ryuto Iwado Japan  
Aurimas Jakstas Lithuania Kaunas University of Technology
Martin Janda Czech Republic Czech Technical University in Prague
Piotr Jankowski Poland Gdynia Maritime University
Michal Jankowski Poland Institute of Metrology and Biomedical Engineering, Warsaw University of Technolo
Justinas Janulevicius Lithuania Vilnius Gediminas Technical University
Konrad Jedrzejewski Poland Institute of Electronic Systems
Roisin Jenkins Ireland  
Shu Jiang China SMERI
Rong-Yuan Jou Taiwan National Formosa University
Wukchul Joung South Korea Korea research institute of standards and science
Michal Junek Czech Republic Czech Technical University
Rodrigo Junqueira Leão Brazil Brazilian Synchrotron Light Laboratory Metrology & Alignment Engineer
Raghu Kacker USA National Institute of Standards and Technology
George Kaisarlis Greece National Technical University of Athens
Hiroaki Kajikawa Japan National Metrology Institute of Japan (NMIJ), AIST
Andreas Kamcke Germany Gigaset Communications GmbH
Dae-Im Kang South Korea Korea Research Institute of Standards and Science
Chu-Shik Kang South Korea Korea Research Institute of Standards and Science
Markus Karjalainen Finland Tampere University of Technology
Petr Kaspar Czech Republic Institute of Atmospheric Physics
Tomoya Katsuno Japan Ritsumeikan
Thomas Kauffmann France University of Lorraine
Mario Kazazi Switzerland CERN - European Organization for Nuclear Research
Laszlo Kazup Hungary Institute of Physics
Philip Keller Switzerland Metrolab Technology SA
Michal Kelnar Czech Republic VSB - Technical University of Ostrava
Fedor Khrapov Russia Russian metrological institute of technical physics and radio engineering
Min-Seok Kim South Korea Korea Research Institute of Standards and Science
Seung Kwan Kim South Korea Korea Research Institute of Standards and Science
Yong-Gyoo Kim South Korea Korea Research Institute of Standards and Science
Tetsuya Kinugasa Japan Okayama University of Science
Leonard Klaus Germany Physikalisch-Technische Bundesanstalt (PTB)
Thomas Kleckers Germany Hottinger Baldwin Messtechnik GmbH
Tobias Klein Germany Physikalisch-Technische Bundesanstalt
Mark Kliebenschädel Switzerland Mettler Toledo AG
Andy Knott United Kingdom National Physical Laboratory
Tokihiko Kobata Japan National Metrology Institute of Japan (NMIJ), AIST
Michael Kobusch Germany Physikalisch-Technische Bundesanstalt (PTB)
Y. Koike Japan Tokyo Institute of Technology
Wataru Kokuyama Japan AIST
Ulrich Kolwinski Germany GTM Testing and Metrology GmbH
Yuri Kononov Russia North Caucasian Federal University
Vessela Konstantinova Bulgaria Union of Metrologists in Bulgaria
Kamil Kontorski Poland Institute of Electrical Metrology
Petr Konvalinka Czech Republic Czech Technical University in Prague
Lenka Kovarova Czech Republic Faculty of Science, University of South Bohemia in České Budějovice, České Budě
Miroslaw Koziol Poland University of Zielona Góra
Jiří Koziorek Czech Republic Technical university Ostrava Faculty of Electrical Engineering and Computer Scie
Zdenek Krajícek Czech Republic Czech metrology institute
Vladimir Kravtsov Russia All Russian Scientific Research Institute for Optical and Physical Measurements
Ivan Krejci Czech Republic College of Polytechnics
Henrik Krisch Germany Krohne Messtechnik
Anatoly Krivov Russia Dipaul Company
Beata Krupanek Poland Institute of Measurement Science, Electronics and Control
Jean-Claude Krynicki France  
Jan Kucera Czech Republic Czech Metrology Institute
Ryota Kudo Japan Osaka University
Michael Kühnel Germany Institute of Process Measurement and Sensor Technology
Edi Kulderknup Estonia Estonian Accreditation Centre
Rolf Kumme Germany  
Joze Kutin Slovenia Faculty of Mechanical Engineering, University of Ljubljana
Cihan Kuzu Turkey Tubitak Ume
Suyong Kwon South Korea Korea Research Institute of Standards and Science
Carmine Landi Italy Dept. Industrial and Information Engineering
Ekaterina Lapina Russia South Ural State University
Dora Lapkova Czech Republic Tomas Bata University in Zlín
Aimé Lay-Ekuakille Italy Universit? del Salento
Maricarmen Lecuna Italy Politecnico di Torino
Yongbum Lee Japan Niigata University
Joohyun Lee South Korea Korea Research Institute of Standards and Science
Sungjun Lee South Korea Korea Research Institute of Standards and Science
Jukka Lekkala Finland Tampere University of Technology
Grzegorz Lentka Poland Faculty of Electronics, Telecommunications and Informatics
Raymond W. M. Leung China The Government of the Hong Kong Special Administrative Region, Standards and Cal
Javier Levitt Switzerland METTLER TOLEDO
Qingzhong Li China National Institute of Metrology
Tiecheng Li China Shanghai Institute of Measurement and Testing Technology
Tao Li China SMERI
Bin Li China Southeast University
Annalisa Liccardo Italy Università Federico II
Frank Lienesch Germany  
Ivana Linkeová Czech Republic Czech Metrology Institute
Thomas Lipe USA National Institute of Standards and Technology
Ignacio Lira Chile Pontificia Universidad Católica de Chile
Cheng Liu Germany ChenYang Technologies GmbH & Co. KG
Jun Liu China National Institute of Metrology
Salvatore Lorefice Italy Istituto Nazionale di ricerca Metrologica
Sam Low USA National Institute of Standards and Technology
Mario Luiso Italy Second University of Naples
Julian Lüscher Switzerland Mettler Toledo
Britta Lütke Germany GTM Testing and Metrology GmbH
Łukasz Macioszek Poland Uniwersytet Zielonogórski
Oliver Mack Germany Physikalisch-Technische Bundesanstalt
Tomoko Maeda Japan ritsumeikan
Graham Machin United Kingdom National Physical Laboratory
Radomir Majchrowski Poland Poznan University of Technology
Vidosav Majstorovic Serbia University of Belgrade
Natallia Makarava Germany Physikalisch-Technischen Bundesanstalt
Eberhard Manske Germany  
Carlo Marinari Italy INRIM
Andrzej Masłowski Poland Institute for Mathematical Machines
Romuald Masnicki Poland Gdynia Martime University
Felix Mathis Switzerland METTLER TOLEDO AG
Ana Matos Portugal Faculty of Sciences and Technology, Universidade Nova de Lisboa
Robert Matzinger Germany Maro Elektronik
Pawel Mazurek Poland Warsaw University of Technology
Nieves Medina Spain Centro Español de Metrología
Joonas Melin Finland Tampere University of Technology
Michael Mende Germany SPEKTRA Schwingungstechnik und Akustik GmbH
Febo Menelao Germany Physikalisch-Technische Bundesanstalt (PTB)
Fanqin Meng China Airforce logistics college
Asta Meskuotiene Lithuania Kaunas University of Technology
Marja Mettänen Finland Tampere University of Technology
Rosario Miceli Italy University of Palermo
Linus Michaeli Slovak Republic Technical University of Kosice
Masaki Michihata Japan Osaka University
Stefan Miljković Serbia  
Marcin Milkowski Poland  
George Milushev Bulgaria Union of Metrologists in Bulgaria
Janusz Mindykowski Poland Gdynia Maritime University
Horst Mischke Germany GTM Testing and Metrology GmbH
Zoran Mitrovic Serbia Faculty of Technical Sciences
Takeshi Mizuno Japan Saitama Univeristy
Roman Z. Morawski Poland  
Zbigniew Moroń Poland Wrocław University of Technology
Petar Mostarac Croatia Faculty of electrical engineering
Christian Müller-Schöll Switzerland Mettler-Toledo AG
Hiroshi Murakami Japan The University of Kitakyushu
Sergey Muravyov Russia  
Dragana Naumovic-Vukovic Serbia Electrical Engineering Institute Nikola Tesla""
Tamara Nesterenko Russia Tomsk Polytechnic University
Markus Neumayer Austria Graz University of Technology
Pavel Neyezhmakov Ukraine National Scientific Centre Institute of Metrology""
Holger Nicklich Germany SPEKTRA Schwingungstechnik und Akustik GmbH
Magdalena Niemczewska-Wójcik Poland Cracow University of Technology
Atsuhiro Nishino Japan National Institute of Advanced Industrial Science and Technology
Hideaki Nozato Japan National Institute of Advanced Industrial Science and Technology
Vukan Ogrizovic Serbia University of Belgrade
Koji Ogushi Japan AIST
Yoshikazu Ojima Japan  
James Olthoff USA National Institute of Standards and Technology
Ingo Ortlepp Germany Technische Universität Ilmenau
Seifelnasr Osman Egypt National Institute For Standards
Petri Österberg Finland University of Oulu
Ksenia Ostrowska Poland Cracow University of Technology
Igor Ostrowski Poland Institute of Mathematical Machines
Iam Palatnik de Sousa Brazil Pontifical Catholic University of Rio de Janeiro
Beata Palczynska Poland Gdynia Maritime University
Ramon Pallas-Areny Spain Universitat Poltècnica de Catalunya
Sheau-shi Pan Taiwan Industrial Technology Research Insittute
Stanislava Papežová Czech Republic Czech university of Life sciences in Prague
Yon-Kyu Park South Korea Korea Research Institute of Standards and Science
Seung-Nam Park South Korea KRISS
Franco Pavese Italy  
Peter Pavlasek Slovak Republic Slovak University of Technology
Jacob Pearce Australia Australian Council for Educational Research
Francesca Pennecchi Italy INRIM
Enrica Pessana Italy Istituto Nazionale di Ricerca Metrologica (INRiM)
Manfred Peters Germany  
Patchariya Petchpong Thailand National Institute of Metrology (Thailand)
T. Pfeifer Germany  
Jeerasak Pitakarnnop Thailand NIMT - National Institute of Metrology, Thailand
Emanuele Piuzzi Italy Sapienza University of Rome
Florian Platel France LNE
Wojciech Plowucha Poland University of Bielsko-Biala
Dragana Popovic Renella Switzerland SENIS AG
Martin Pospisilik Czech Republic Faculty of Informatics
Oliver Posth Germany Physikalisch-Technische Bundesanstalt
Günther Poszvek Austria Institute for Production Engineering and Laser Technology
Dominik Pražák Czech Republic Czech Metrology Institute
Jiri Pribil Slovak Republic nstitute of Measurement Science, Slovak Academy of Sciences
Pavel Psota Czech Republic Technical University of Liberec
Maxim Puchnin Czech Republic Czech Technical University in Prague
Omar Purata Mexico Universidad de Guanajuato
Aimo Pusa Finland  
Thierry Rabault France LNE
Lawrence Rainbird United Kingdom Fluke Europe - Fluke Calibration
Satu Rajala Finland Tampere University of Technology
Pedro Ramos Portugal Instituto de Telecomunicações
Sergio Rapuano Italy University of Sannio
Torben Rask Licht Denmark Danish Primary Laboratory of Acoustics
Edita Raudiene Lithuania Institute of Metrology
Jukka-Pekka Raunio Finland Tampere University of Technology
Sofia Razzak France Gaztransport et Technigaz
Marcel Reginatto Germany Physikalisch-Technische Bundesanstalt
Paul P.L. Regtien Netherlands  
Maria Luisa Reis Brazil Institute of Aeronautics and Space - IAE
Philippe Richard Switzerland  
Pavel Ripka Czech Republic Czech Technical University
Maik Rosenberger Germany Ilmenau University of Technology
Dirk Röske Germany PTB - Physikalisch-Technische Bundesanstalt
Giovanni Battista Rossi Italy Università degli Studi di Genova
Jaroslav Roztocil Czech Republic Czech Technical University
Slava Rudnev Russia North-Caucasus Federal University
Karl Ruhm Switzerland Swiss Federal Institute of Technology (ETH)
Gerardo Ruiz Mexico Ccadet-unam
Klemen Rupnik Slovenia University of Ljubljana, Faculty of Mechanical Engineering
Fabio Saba Italy INRIM
Alexandru Salceanu Romania Gheorghe Asachi" Technical University of Iasi"
Jan Saliga Slovak Republic Technical university of Kosice
Timo Salpavaara Finland Tampere University of Technology
Tassanai Sanponpute Thailand National Institute of Metrology (Thailand)
Kseniia Sapozhnikova Russia D.I. Mendeleyev Institute for Metrology
Kristina Sariri Croatia Croatian Metrology Institute
Kornél Sarvajcz Hungary University of Debrecen
Guido Sassi Italy Politecnico di Torino
Amritlal Sawla Germany  
Michele Scervini United Kingdom University of Cambridge
Konstantin Semenov Russia Peter the Great St.Petersburg Polytechnic University
A.C. Serra Portugal  
Aleksandr Shestakov Russia South Ural State University
Katsuhiro Shirono Japan National Institute of Advanced Industrial Science and Technology
Vladimir Shper Russia  
Lin Shuo China Fujian Metrology Institute
Marco M. Schäck Germany Hottinger Baldwin Messtechnik GmbH
Wolfgang Andre Schäfer Germany HBM Hottinger Badlwin Messtechnik GmbH
Bernard Scheffler Czech Republic Roche s.r.o., Diagnostics Division
Rosario Schiano Lo Moriello Italy Universita degli studi di Napoli Federico II
Alessandro Schiavi Italy National Institute of Metrological Research
Mark I. Schiefer USA The Modal Shop, Inc.
Christian Schlegel Germany Physikalisch-Technische Bundesanstalt
Robert Schmitt Germany WZL Aachen
Richard Schreiber Czech Republic Technical University of Liberec
Frank Schulz Germany SPEKTRA Schwingungstechnik und Akustik GmbH
Harald Schumny Germany  
Daniel Schwind Germany GTM Testing and Metrology GmbH
Lauryna Siaudinyte Lithuania Vilnius Gediminas Technical University
Álvaro Silva Ribeiro Portugal LABORATÓRIO NACIONAL DE ENGENHARIA CIVIL
Victor Simon Sweden Luleå Tekniska Universitet
Tatiana Siraya Russia Concern CSRI Electrorpribor
Jerzy Sładek Poland Laboratory of Coordinate Metrology
Ian Smith United Kingdom National Physical Laboratory
Christiaan Smith Veldman South Africa National Metrology Institute of South Africa
Lukasz Sobolewski Poland Institute of Electrical Metrology
Junfeng Song Song USA NIST
Joao Sousa Portugal LREC
Maurizio Spadavecchia Italy Politecnico di Bari
Ciro Spataro Italy Universita di Palermo
Corey Stambaugh USA National Institute of Standards and Technology
Dan Mihai Stefanescu Romania  
Krzysztof Stepien Poland Kielce University of Technology
Slavenko Stojadinovic Serbia University of Belgrade, Faculty of Mechanical Engineering
Beckert Sueli Fischer Brazil Universidade Federal de Santa Catarina - UFSC
Ho Suhng Suh South Korea Korea Research Institute of Standards and Science
Yubin Sun China Huazhong University of Science and Technology
Qiao Sun China National Institute of Metrology
Tomomichi Suzuki Japan Tokyo University of Science
Andrej Svete Slovenia Faculty of Mechanical Engineering
Georgy Sviridyuk Russia South Ural State University
Jacek Świderski Poland Kielce University of Technology
Jakub Sýkora Czech Republic Czech Metrology Institute
Anton Štibler Slovenia Slovenian National Building and Civil Engineering Institute (ZAG)
Naehyung Tak South Korea Korea Research Institute of Standards and Science
Yasuhiro Takaya Japan Graduate School of Engineering
Shigeru Takayama Japan Ritsumeikan University
Motoki Takuno Japan Ritsumeikan
Tomasz Tarasiuk Poland Gdynia Maritime University
Falk Tegtmeier Germany Physikalisch-Technische Bundesanstalt
Ondrej Teren Czech Republic Czech Technical University in Prague Klokner Institute
Sergey Tikhomirov Russia All Russian Scientific Research Institute for Optical and Physical Measurements
Arfan Tistomo Indonesia Metrologi LIPI
Ján Tomlain Czech Republic Czech Technical University in Prague
Teodor Tóth Slovak Republic Technická univerzita v Kosicich
Oleksandr Tsiporenko Ukraine SE Ukrmetrteststandart
Tsung-Hsien TU Taiwan Industrial Technology Research Institute
Olga Tůmová Czech Republic University of West Bohemia, Faculty of Electrical Engineering
Emese Turzo-Andras Hungary Hungarian Trade Licensing Office
Sampo Tuukkanen Finland Tampere University of Technology
Boleslaw Tync Poland TYBO
Mieko Uchiyama Japan Graduate School of Health Sciences, Niigata University
Kosuke Uchiyama Japan The University of Kitakyushu
Michal Ulvr Czech Republic Czech Metrology Institute
Eva Vaculíková Czech Republic  
Adriana Valcu Romania National Institute of Metrology
Alberto Vallan Italy Politecnico di Torino
Leo Van Biesen Belgium Vrije Universiteit Brussel
Angela Varadine Szarka Hungary University of Debrecen
Suren Vasilyan Germany TU Ilemanu
Grazia Vicario Italy Politecnico di Torino
Christian Villarroel Chile Instituto de Investigaciones y Control del Ejército
Jaromír Volf Czech Republic Czech University of Life Sciences
Henrik Volkers Germany Physikalisch-Technische Bundesanstalt PTB
Andrei Volosnikov Russia South Ural State University
Ernst von Lavante Germany Lehrstuhl für Strömungsmechanik
Nataliya Vorbringer-Dorozhovets Germany Technische Universität Ilmenau
Khoa Vu Van Japan Ritsumeikan University
Jiri Vyroubal Czech Republic Czech Technical University in Prague
Michael Wagner Germany Physikalisch-Technische Bundesanstalt
Jakub Wagner Poland Warsaw University of Technology
Zygmunt Warsza Poland Industrial Research Institute for Automation and Measurements (PIAP)
Kamol Wasapinyokul Thailand National Institute of Metrology (Thailand)
A. Weckenmann Germany  
Klaus Wendt Germany Physikalisch-Technische Bundesanstalt
Teresa Werner Germany Metrodata GmbH
Peter Weyrich Germany  
Wieslaw Winiecki Poland Warsaw University of Technology
Jacob Holm Winther Denmark  
Marta Wisniewska Poland Warsaw University of Technology
Mariusz Wisniewski Poland Central Office of Measures
Viktor Witkovsky Slovak Republic Institute of Measurement Science, Slovak Academy of Sciences
Sam-Yong Woo South Korea KRISS
Richard Wotherspoon United Kingdom Norbar Torque Tools Ltd
Mikołaj Woźniak Poland Główny Urząd Miar (GUM) / Central Office of Measures
Jian Wu Singapore National Metrology Centre
Bingyu Xia China SMERI
Chan-Na Xu China  
Zhao Xueping China Fujian Provincial Bureau of Quality and Technical Supervision
Yuji Yamakawa Japan The University of Tokyo
Takashi Yamamoto Japan Yamamoto Scientific Tool Lab. Co., Ltd.
Masayuki Yamamoto Japan Yamamoto scientific tool lab. co.,ltd.
Randa Yamani Egypt National Institute of Standards
Takanori Yamazaki Japan Tokyo Denki University
Jinhui Yao China Fujian Metrology Institute
Natalia Yaparova Russia South Ural State University
Seiichi Yasui Japan Tokyo University of Science
Dejin Yin China  
Koji Yoshida Japan Okayama University of Science
Natsue Yoshimura Japan Tokyo Institute of Technology
Adler Yury Russia  
Bernhard Zagar Austria  
Hubert Zangl Austria Alpen-Adria-Universitaet Klagenfurt
Giovanna Zappa Italy ENEA
Daniel Zeiss Switzerland Mettler Toledo AG
Martin Zelan Sweden  
Zoltán Zelenka Austria BEV - Bundesamt für Eich- und Vermessungswesen
Evgeniy Zelenskiy Russia  
Vít Zelený Czech Republic Czech Metrology Institute
Arbër Zeqiraj Albania  
Hao Zhang China Hunan Institute of Metrology and Test
Huzhong Zhang China Lanzhou Institute of Physics
Zhimin Zhang China National institute of metrology
Zhijie Zhang China North University of China
Yong-Guo Zhang China  
Andrzej Zieba Poland AGH University of Science and Technology
Claudia Zoani Italy ENEA
Viharos Zsolt Janos Hungary Institute for Computer Science and Control
Jaroslav Zuda Czech Republic Czech Metrology Institute
Youdao Zuo China SMERI
Pavel Zvada Russia NCFU
Davor Zvizdic Croatia Croatian Metrology Institute
Marcin Zych Poland AGH University of Science and Technology
Tomáš Žabka Czech Republic GTM Testing and Metrology GmbH
Alar Željko Croatia Faculty of Mechanical Engineering and Naval Architecture
   
 
 
Congress Secretariat: C-IN, 5. kvetna 65, 140 21 Prague 4, CZE | tel.: +420 261 174 301 | fax: +420 261 174 307
Copyright © 2010 imeko2015.org | Powered and created by E-WORKS - web studio | XHTML 1.0 | CSS 2